- 10cm x 7.2cm超小型Pico-ITX主板
- 搭载800MHz NXP i.MX537 Cortex-A8处理器
- 支持-40°C ~ 85°C宽温工作
- 支持双CAN总线及双COM接口
- 提供Linux及Android软件开发包（BSP），包含威盛Smart ETK软件工具包，加快产品开发
- 最后下单日期：2018年4月30日，最后交货日期：2018年9月28日
概述
威盛VAB-800 Pico-ITX ARM主板
威盛VAB-800主板搭载800MHz NXP Cortex-A8 ARM处理器，拥有先进的多媒体性能、丰富的I/O接口、低功耗、宽温工作等特性，可为各种人机界面（HMI）、工业自动化、能源管理及车载应用等领域提供灵活、可靠的解决方案。
硬件
威盛VAB-800基于超小型Pico-ITX主板，尺寸仅为10 cm x 7.2 cm，可提供丰富的I/O接口和连接性能。
软件
威盛VAB-800 Android评估套件（EVK）提供Android 2.3及包含多个应用程序接口的威盛Smart ETK软件工具包，其中包括防止系统崩溃的Watchdog定时器（WDT）、GPIO接口、COM接口、RTC自动电源唤醒及1个例程应用。
威盛VAB-800 Linux 评估套件（EVK）预置Ubuntu image，包括内核及启动加载器源代码。其他性能包括1个Tool Chain，帮助调整内核，管理板载排针、GPIO接口、I2C接口及其他硬件特性。
同时还提供一套完整的软件客制化服务，帮助客户加快产品上市时间，降低开发成本。
扩展性
VAB-820主板可进一步集成可选的高速USB Wi-Fi模块。
应用
VAB-800主板支持-40°C ~ 85°C（工业级型号）宽温工作，最高5瓦的低功耗设计，可为各种严苛环境中打造坚固、可靠的平台。
解决方案
威盛AMOS-800是基于VAB-800主板的一款完整的坚固型系统解决方案。
威盛 VAB-800 即将停产，最后下单截止日期为2018年4月30日，最后交货日期为2018年9月28日， 欲了解更多相关型号产品，请访问威盛官网 VAB-820。
数据資料
点击此处下载VAB-800数据资料PDF版，或浏览以下信息：
| 型号 | VAB-800 |
|---|---|
| 处理器 | 800MHz NXP i.MX537 Cortex-A8 SoC |
| 系统内存 | 1GB DDR3 SDRAM onboard |
| 板载存储 | 4GB eMMC Flash memory |
| 显卡 | AMD Z430 GPU 2 integrated, independent 3D/2D graphics processing units Graphics engine supporting OpenGL® ES 2.0 and OpenVG™ 1.1 hardware acceleration Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p |
| LAN | SMSC LAN8720A 10/100 PHY transceiver with HP Auto-MDIX support |
| 音频 | NXP SGTL5000 low power stereo codec |
| HDMI | Silicon Image SiI9024A HDMI transmitter |
| USB | SMSC USB2514 USB 2.0 high speed 4-port hub controllers |
| CAN | TI SN65HVD1050 EMC optimized CAN transceiver |
| 板载 I/O | 1 SATA connector with voltage select jumper for DOM 1 SATA power supply connector for 2.5" HDD/SSD 1 Miscellaneous pin header for 2 USB 2.0 ports, 1 USB device port, 2 CAN bus ports, system power-on and reset 2 COM port connectors with power supply (one supports 8-wire DCE mode, another supports 2-wire for debug) 1 Miscellaneous pin header for 4-wire resistive touch screen interface, I2C and Digital I/O (4 GPI + 4 GPO) 2 Single-channel 18/24-bit LVDS panel connectors 1 Micro SD card slot 1 RTC battery connector 1 JTAG pin header (for debugging) 1 Boot Flash select pin header for eMMC or SD 1 Front audio pin header for Line-in, Line-out, Mic-in 1 DC-in connector |
| 后面板 I/O | 2 USB 2.0 ports 1 Mini HDMI port 1 VGA port 1 10/100M Ethernet port |
| 电子看门狗 | Integrated watch dog timer supports two comparison points. Each comparison point can interrupt ARM core, 2nd comparison point capable of generating external interrupts on WDOG line |
| 供电 | 5V DC-in |
| 操作系统 | Android 2.3, Linux Kernel 2.6.35, WEC7 |
| 工作温度 | Commercial grade: 0°C to 60°C Industrial grade: -40°C to 85°C (optional) |
| 工作湿度 | 0% ~ 95% (non-condensing) |
| 产品尺寸 | Pico-ITX (10cm x 7.2cm, 3.9" x 2.8") |
下载
VAB-800 文件
| 文件 | 版本 | 日期 |
|---|---|---|
| 用户手册 | v1.04 | 2014-12-16 |
| 快速入门手册 | v1.02 | 2013-03-11 |
| Linux 开发指南 for BSP v1.4.8 | v1.04 | 2014-12-26 |
VAB-800 软件下载
| 软件 | 版本 | 日期 |
|---|---|---|
| Android | ||
| Android 2.3 Board Support Package (BSP) (272.8MB) | v1.3.3 | 2015-02-13 |
| Android 2.3 Evaluation Kit (EVK) (270MB) | v1.3.3 | 2015-02-13 |
| Linux | ||
| Linux Board Support Package (BSP) (1GB) | v1.4.8 | 2014-09-23 |
| Linux Evaluation Kit (EVK) (87MB) | v1.4.8 | 2014-09-23 |
| Linux Evaluation Kit with QT Embedded (949MB) | v1.0.1 | 2013-04-25 |
- U-Boot version: 2009.08
- Kernel version: 2.6.35
- Evaluation image: Android Gingerbread 2.3
- Development based on NXP Android BSP r10.3
- Support eMMC as default boot device
- Support Mini HDMI, VGA, LVDS single display
- Support Mini HDMI audio output
- Support display auto detection for either HDMI or VGA
- Support 2 LVDS single channel ports
- Support AUO LVDS resistive touch panel (through 4-wire interface)
- AUO 7″ G070VW01 (800×480)
- Support COM1 DCE mode, COM2 as debug port in default
- Support 2 FlexCAN TX/RX
- Support 10M/100M Ethernet
- Support Ethernet static IP configuration
- Support Line-in, Line-out, Mic-in
- Support EMIO-1533 USB Wi-Fi module
- Support VNT9271 USB Wi-Fi dongle
- Support Watchdog and GPIO
(Bold font highlights the changes in this BSP release.)
- U-Boot version: 2009.08
- Kernel version: 2.6.35
- Evaluation demo image: Ubuntu 10.04
- Developed based on NXP Linux BSP 11.09.01
- Support eMMC and Micro SD boot
- Support Mini HDMI, VGA, LVDS single display
- Support Mini HDMI audio output
- Support display auto detection for either HDMI or VGA
- Support dual display: HDMI+VGA, LVDS1+VGA, HDMI+LVDS2, or LVDS1+LVDS2
- Clone and extend mode supported
- Support 2 LVDS single channel ports
- Support AUO LVDS resistive touch panel (through 4-wire interface)
- AUO 7″ G070VW01 (800×480)
- Support XRandR
- Support COM1 DCE mode, COM2 as debug port
- Support 2 FlexCAN TX/RX
- Support 10M/100M Ethernet
- Support Line-in, Line-out, Mic-in
- Support EMIO-1533 USB Wi-Fi module
- Support VNT9271 USB Wi-Fi dongle
- Support Watchdog and GPIO
- U-Boot version: 2009.08
- Kernel version: 2.6.35
- Evaluation image: Ubuntu 10.04
- Development based on NXP Linux BSP 11.09.01
- Support eMMC and Micro SD boot
- Support Mini HDMI, VGA single display
- Support display auto detection for either HDMI or VGA
- Support Mini HDMI audio output
- Support 10M/100M Ethernet
- Support 3D and video HW acceleration on QT Embedded v4.8.2
订购
VAB-800 订购信息
| 型号 | SoC | 描述 |
|---|---|---|
| VAB-800 Commercial Grade: 10GZ9084000A0 | NXP i.MX537 @ 800MHz | Pico-ITX board with 800MHz NXP Cortex-A8 SoC, 4GB eMMC, 1GB DDR3 SDRAM, VGA, mini-HDMI, 2 LVDS, 5 USB 2.0, 2 COM, 10/100Mbps Ethernet, SATA, CAN bus, 5V DC-in 包装清单: VAB-800 board, DC power cable, debug COM cable, audio cable, 2-port USB cable |
| VAB-800 Industrial Grade: 10GZ9084400A0 |
VAB-800 无线模块
| 型号 | 描述 |
|---|---|
| EMIO-1533-00A2 | VNT9271 IEEE 802.11 b/g/n USB Wi-Fi module with assembly kit |
